Technical passport >   

• purpose

  This is a device for blocking radio frequencies, designed to
  limit the functioning of devices operating over wireless channels.
  The radio frequency suppression radius can reach 15/25 meters and depends on the proximity and power
  of the radiation source: the base station of the cellular operator, Wi-Fi/4G router, 3G modem.
  The suppressor is equipped with switches for switching on and off the selected blocking frequency range,
  which allows you to configure the device, depending on the task at hand.
  • Suppresses 51 digital data exchange standards in 16 radio frequency bands.
  • Easily suppresses mobile Internet, cellular communications, UHF/VHF signals, Wi-FI, GPS, Glonass
  • Equipped with an integrated battery for one-hour battery life.
  • The impact field reaches 30 meters and is directly dependent on the location of the nearest repeater.
  • Package dimensions, mm: 325x250x80, the weight of the device in it is 1.8 kg.
  • The ability to adjust exposure ranges
     
    features:
  • The power of the blocker is 12 watts, which makes it possible to suppress the operation of other devices in the range of thirty meters. It is worth noting that the power and range of the device may vary, depending on the location and functional characteristics of the operator's base stations.
  • The battery charge sensor helps you understand when the device needs to be powered from the mains.
    51 wireless connection blocking standards make it easy to suppress 16 frequencies, and these are many modern gadgets (smartphones, wiretapping bugs, video cameras, etc.).
  • Due to its high power, the Terminator 33 5g cellular suppressor can affect unwanted devices in the range of 30 meters.
    It jammes the 5.2/2.4GHz Wi-Fi signals.
  • Based on the tasks set, some frequencies can be turned off, while continuing to drown out other unwanted signals.
    The device can function autonomously for up to one hour due to the built-in battery. The suppressor can be powered from a 220V mains or from a car cigarette lighter.
  • Thanks to the active cooling system, the device can be operated for a long time without breakdowns and damages. Blocking the VHF and UHF bands, which disables the operation of most portable radios and walkie-talkies.
  • The suppressor allows you to warn yourself against tracking through GPS trackers, the GLONASS system, or other location-based systems. It provides blocking of the mobile Internet, as well as cellular communications.
  • WORKING WITH THE SUPPRESSOR
    1. Before starting work, screw the antennas (into connectors 6 in Fig.1), observing the frequencies so that the numbers on
    the antennas and on the connectors of the suppressor housing match.
    Attention!
    Do not turn on the device without the antennas, as this may cause the device to fail.
    2. Charge the suppressor. Connect the device to a 220V power adapter or a car
    cigarette lighter, the red "CHARGE" indicator will light up, when it turns green - the battery is charged,
    the device is ready to work. Disconnect it from the charger.
    3. Selection of suppressed frequencies. Using DP switches (item 4 in Fig. 1) On the side of
    the device, select the desired suppression frequencies, then turn the switch to the upper position -
    ON. If all switches are turned on, the entire radio frequency range will be blocked. The correspondence
    of switches and frequencies can be found in the following table:
      Technical passport  >   
    attention
    The suppression radius depends on the proximity and power of the base station of the cellular operator and
    the radio emitting device and can reach 15 meters..