NISSAN INFINITI KEY PROGRAMMING V.5.14. NEW
NISSAN INFINITI KEY PROGRAMMING V.5.14. NEW
Prepare the device by setting the switches to the desired mode. Conventional key system ● For gasoline models 1-ON ● For diesel models 6-ON 1. Insert the key, turn on the ignition. 2. Connect the device to the diagnostic connector of the OBD-2. The green LED lights up. 3. After 5 seconds, the device will emit 3 short beeps and the green LED will light up. 4. Turn off and turn on the ignition twice. The key indicator on the instrument panel will blink 5 times and should go out. 5. Turn off the ignition. *To record an additional key within 5 seconds, insert a new key and turn on the ignition after step 3, and complete steps 4 and 5.
The SMARTKEY system. (Starting the engine with the START button)
● 5-ON
1. Insert the key into the key holder. Press the brake pedal or the START button once.
2. Insert the device into the diagnostic connector of the OBD-2. The steering column lock will unlock within 5 seconds and the device will emit a signal.
3. Press the START button to turn on the ignition. Within 5 seconds, the device will emit 1 and then 3 signals and the green LED will light up.
4. Turn off and turn on the ignition 2 times in a row. The key indicator on the instrument panel will blink 5 times and should go out.
5. Turn off the ignition. The steering column lock must be closed. After that, the engine can be started.
6. To record an additional key within 5 seconds, insert the new key into the key holder and turn on the ignition after step 3, and complete the procedure in steps 4 and 5.
Arabic (ar) 
German (de) 
Portugal (pt) 
Русский (ru)